VapeSnail by Atmizoo
Atmizoo revolutionizes the bridge for Billet Box!
All in one by Atmizoo
In continuation of the work proposed by the Greek modder of Atmizoo, the VapeSnail, strong of its innovations, will bring a simpler and practical vision to your Ticket Box or to any other machine working with a Boro (Zero Boro, Fifty-50 ... )
The VapSnail consists for its upper part of a 5ml tank. Its particularity is that it completely replaces the original Boro of the Billet Box. It is filled using a tab located on the front like a pod. It is at the base of the VapSnail that is the deck that can accommodate a simple coil assembly. As for the liquid inlets, they are located at the top of the atomization chamber, which allows an excellent supply of liquid as well as a higher capacity.
An ergonomic Tank Bridge.
The VapSnail borrows a lot from the Vapeshell its predecessor, on the mounting deck. To access it, simply remove the VapSnail from the box and then pull on its base. For the first time on Billet Box it is possible to access the plateau without emptying your Boro!
The deck consists of two diametrically opposed screws and two large notches on the edges of the tray. These notches have two functions, the first is that it serves as a guide for your resistance so that it is perfectly in the center of the tray and the airflow. The second is that they serve as a cutting guide in order to have the optimal amount of cotton inside the deck
In order to stabilize your resistance Atmizoo provides a 510 adapter which must be screwed in place of the positive Pin previously dismantled using the unscrewing key to check your assembly.
From DL to pure MTL without condensation
Atmizoo is inspired here by the Tripod! Indeed The VapSnail has a 4 mm airflow in the center of the tray, 4 additional aiflow tubes are provided to replace the original one. They offer an opening diameter of 3.5 mm, 3 mm, 2.5 mm and 2 mm. The airflow can be changed at any time, even with mounting in the deck using the supplied unscrewing key.
It is also possible to add an MTL insert in the center of the 4.0 mm Positive Pin, in order to reduce the maximum air flow and adapt it to your liking. 4 Pins are included, they have a diameter of 1 mm, 1.2 mm, 1.5 mm and 1.8 mm.
To be suitable for your build, a removable chamber reducer is positioned or not in the chimney. It therefore reduces the size of the chamber and the diameter of the chimney from 4 to 2.5 mm
Atmizoo does not stop at the airflow settings and includes with the VapSnail an ingenious anti-condensation system, placed under the tray. Provided with a buffer absorbing the excess of condensation which can escape from the air inlets, it thus ensures to keep your Box dry.
The materials used
- Food grade SS316 stainless steel for metal parts
- PEEK insulation
- BPA-free PCTG tank
- Pole screw in SS 304 stainless steel
- Food grade O-ring and tray seals
- Anti-condensation joint and semi-synthetic manufacturing
Contents of the packaging
- 1 VapeSnail
- 1 pre-installed chamber reducer
- 1 Base 510
- 5 airflow tubes (2 / 2.5 / 3 / 3.5mm) 4mm pre-installed
- 4 pins MTL
- 2 pole screws
- 1 O-ring kit
- 1 tool key
7 Péchés Capitaux
Alien Visions
Bisha 
CustoMixed
Dinner Lady
Fuel
Liquideo
My s Vaping
O-Juicy
Sting Flava
BlendFEEL 
Flavormonks
Crafter\'s Den 
Divide Et Vape
E-Phoenix
Holy Atty
K&R Vapour
Koncio Mods
StattQualm
SvoëMesto
