AIO & Billet Box™ Corner

Filter

AIO & Billet Box™ Corner

Find in the AIO Corner the Billet Box™, DotAIO and other Boro Box Mods as well as their accessories: Boro, Bridge, AiO Atomizers, Switch, Drip Tips...

  • Out of stock

    The Rubik RBA is a rebuildable bridge designed by the Italian modder MC2. Compatible with the Boro R4 format, it is a single coil atomizer, MTL-RDL type, having an airflow adjustable by interchangeable pins and a volumetric bell system.

    99,17 €
    Out of stock
  • The Gravity is a bi-material boro tank for AIO mods designed by the Italian modders of Mc2. The Gravity is compatible with mods accepting the Boro Rev 4 format from Billet Box. It has an air flow on the front and ssides a well as a Top Slide filling.

    45,75 €
    In Stock
  • Out of stock

    The Tita X AIO is a Boro AIO mod in Billet Box format designed by Veepon. Powered by a 21700 battery, it has a power of 60W and comes with a Tita Tank as well as a bridge for VVC coils with two chimneys.

    108,25 €
    Out of stock
  • The Crypt Boro Tank is a PCTG tank with an anodized aluminum base, designed by Suicide Mods. Crypt Boro Tanks are compatible with AiO Mods that use Billet Box's Boro Rev4 tanks.

    18,25 €
    In Stock
  • The Stubby AIO + RDTA is an electronic AIO box and an rebuildable atomizer designed by Suicide Mods in collaboration with Vaping Bogan and Orca Vape. Operating with an 18650 battery, for a maximum power of 80W, it is compatible with the Boro R4 format thanks to an adapter and its RDTA allows an RDL vape with 8.7 ml of capacity.

    133,25 €
    In Stock
  • Out of stock

    The Ether Boro RBA is an AIO tank and RBA Bridge kit designed by Suicide Mods for mods compatible with the Boro R4 format. Composed of a tank with a capacity of 5 ml, it has a single coil deck, with interchangeable airflow pins and a front filling.

    62,42 €
    Out of stock
  • Out of stock

    The Vision RBA is a Boro tank AIO atomizer designed by Umbrella Mods. Compatible with mods accepting the boro R4 format, the particularity of the Vision RBA is to be anti-leak and anti-condensation thanks to an air supply system through the drip tip. Equipped with a single coil deck, its airflow is adjustable by interchangeable pins and its filling is done

    82,50 €
    Out of stock
  • Out of stock

    The Hazard RTA is a rebuildable atomizer but also a Boro R4 compatible bridge designed by Across Vape x Dovpo. This tank is compatible with a large number of bridges and has a diameter of 24 mm for a height of 45 mm. It has an adjustable airflow and a filling from the top for a capacity of 4 ml. Its deck which also acts as a bridge is a single coil designed

    41,58 €
    Out of stock
  • The Oxidation BORO-Black Blue is an aluminum tank designed by SSS LAB in a limited edition. Compatible with mods using the Boro R4 format. They have an etched tempered glass.

    49,17 €
    In Stock
  • The Oxidation BORO-Flame is an aluminum tank designed by SSS LAB in a limited edition. Compatible with mods using the Boro R4 format. They have an etched tempered glass.

    49,17 €
    In Stock
  • The BORO-Chimpanzee is an aluminum tank designed by SSS LAB in a limited edition. Compatible with mods using the Boro R4 format. It has sublime engravings and a tempered glass also engraved.

    74,17 €
    In Stock
  • The BORO-Fortune cat is an aluminum tank designed by SSS LAB in a limited edition. Compatible with mods using the Boro R4 format. It has sublime engravings and a tempered glass also engraved.

    74,17 €
    In Stock
  • The BORO-Zombie is an aluminum tank designed by SSS LAB in a limited edition. Compatible with mods using the Boro R4 format. It has sublime engravings and a tempered glass also engraved.

    90,83 €
    In Stock
  • Out of stock

    The Cthulhu White Delrin AIO Box is a regulated AIO mod designed by Cthulhu Mod compatible with the boro R4 format. Equipped with a chip that can deliver a maximum of 60W, it works with an 18650 battery and comes with a Boro and two bridges, one of which is rebuildable. This special edition is designed in delrin and benefits from several new features.

    116,58 €
    Out of stock
  • Out of stock

    The Vidar 21700 is an AIO box mod designed by Filipino modders Vicious Ant. Compatible with the boro R4 format or an AIO atomizer, it is powered by the DNA 60 with a maximum power of 60 watts and is powered by a 21700 battery.

    366,67 €
    Out of stock
  • The MVP is an integrated Drip Tip in Billet Box format designed by Protocol V Tech in Spain.

    33,33 €
    In Stock
  • The S-PROro PC Smoked is a bi-material boro tank for AIO box mods designed by the Spanish modders of PRC. The S-PROro are compatible with mods accepting the Boro Rev 4 format from Billet Box. They have an air flow on the front and on the sides.

    37,50 €
    In Stock
  • The S-PROro PC is a bi-material boro tank for AIO box mods designed by the Spanish modders of PRC. The S-PROro are compatible with mods accepting the Boro Rev 4 format from Billet Box. They have an air flow on the front and on the sides.

    37,50 €
    In Stock
  • The S-PROro White Delrin is a bi-material boro tank for AIO box mods designed by the Spanish modders of PRC. The S-PROro are compatible with mods accepting the Boro Rev 4 format from Billet Box. They have an air flow on the front and on the sides.

    37,50 €
    In Stock
  • The S-PROro Black Delrin is a bi-material boro tank for AIO box mods designed by the Spanish modders of PRC. The S-PROro are compatible with mods accepting the Boro Rev 4 format from Billet Box. They have an air flow on the front and on the sides.

    37,50 €
    In Stock
  • The MTL Custom Tip Integrated are drip tips in Billet Box format. Designed by Super Source they are made of anodized titanium. Compatible with Billet Box, Stubby AIO

    44,25 € 49,17 €
    Reduced price!
    In Stock
  • The MTL Tip Integrated are drip tips in Billet Box format. Designed by Super Source they are made of anodized titanium. Compatible with Billet Box, Stubby AIO

    44,25 € 49,17 €
    Reduced price!
    In Stock
  • The DL Custom Tip Integrated are drip tips in Billet Box format. Designed by Super Source they are made of anodized titanium. Compatible with Billet Box, Stubby AIO

    44,25 € 49,17 €
    Reduced price!
    In Stock
  • The DL Tip Integrated are drip tips in Billet Box format. Designed by Super Source they are made of anodized titanium. Compatible with Billet Box, Stubby AIO

    44,25 € 49,17 €
    Reduced price!
    In Stock
  • Inners for Billet Box Rev4B Mission/Kontrl switch cutout by Super Source.

    149,17 €
    In Stock
  • Out of stock

    The Psyc is a rebuildable bridge developed by Psyclone Mods in collaboration with Susco. Compatible with the Boro R4 format, it has a four-stud single coil deck. Delivered with two chimneys, it allows an MTL or RDL vape.

    112,50 €
    Out of stock
  • The Heir V2 Diamond Series is a rebuildable bridge designed by GKI. Compatible with the Billet Box Boro R4 format, it is equipped with a single coil deck with clamps, multiple air settings using interchangeable pins and a 510 connection.

    95,20 € 119,00 €
    Reduced price!
    In Stock
  • Out of stock

    The TMD Boro is an Boro tank atomizer designed by BP Mods. Working with TMD, GTX or PnP coils, it is compatible with AIO that can accommodate a boro R4. With a capacity of 5 ml, it has an air flow adjustment at its base and a filling on the front.

    29,92 €
    Out of stock
  • Out of stock

    The TMD Dot Tank is a tank designed by BP Mods for DotAIO format. With a capacity of 2.6ml, it consists of a PCTG tank and a steel base with an airflow control. Compatible with TMD, PNP and GTX coils.

    28,25 €
    Out of stock
  • Out of stock

    The Tita Tank is a PCTG tank in boro R4 format designed by Veepon. With a capacity of approximately 4.5 ml, it has the particularity of having a filling on the front thanks to a silicone tab and an opening from above.

    8,25 €
    Out of stock
  • Out of stock

    The Tita X RBA is a rebuildable bridge for boro R4 format. Designed by Veepon, it has a single coil deck with diametrically opposed studs, adjustable airflow via interchangeable pins and allows a vape ranging from MTL to RDL.

    29,08 €
    Out of stock
  • Out of stock

    The D-01 is a regulated AIO box designed by SKNKWORKX. Taking up bases of a Dot AIO, it works with an 18650 battery, and with all compatible Dot AIO tanks. Its DNA 60 chip can deliver a maximum of 60 W and it is equipped with a USB-C port.

    165,83 €
    Out of stock
  • Set of curved panels and switch Willis model for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of T6 aluminum, CNC machined and engraved.

    108,33 €
    In Stock
  • Engraved replacement glass window for R4 Boro and Proro for Billet Box, made by SNV Mods.

    10,75 €
    In Stock
  • The Cthulhu AIO Box is a regulated AIO mod designed by Cthulhu Mod compatible with the boro R4 format. Equipped with a chip that can deliver a maximum of 60W, it works with an 18650 battery and comes with a Boro and two bridges, one of which is rebuildable.

    99,92 €
    In Stock
  • Out of stock

    PRC Pouch Protocol carrying case in leather like by Nacht Werks. Ideal for transporting and protecting your equipment.

    16,50 € 18,33 €
    Reduced price!
    Product available with different options
  • PRC Pouch Protocol carrying case in ecoFoam by Nacht Werks. Ideal for transporting and protecting your equipment.

    16,50 € 18,33 €
    Reduced price!
    In Stock
  • Out of stock

    The Atom 1.1 MK-01 is a rebuildable bridge for boro tank designed by modder PRC. It has a single coil plate and is typed RDL. This version with a reworked design has an engraving on its face and interchangeable airflow pins.

    137,50 €
    Out of stock
  • Out of stock

    The Atom 1.1 B-HZRD is a rebuildable bridge for boro tank designed by modder PRC. It has a single coil plate and is typed RDL. This version with a reworked design has an engraving on its face and interchangeable airflow pins.

    195,83 €
    Out of stock
  • Out of stock

    Nut Aesthetic 510 adapter compatible with Billet Box™ and Boro Box, plus a Switch for Billet Box, all made by the Italian modder MC2.

    29,92 €
    Out of stock
  • Out of stock

    Albert Ultime Kit Rubik is a set of accessories for the Rubik RBA from MC2. Composed of 2 new airflow pins, two atomization bells and a drip tip, this kit gives the Rubik RBA a breath of fresh air.

    41,58 €
    Out of stock
  • The DarkSide21 is an accessory designed for the Rubik's bridge from MC2. Replacing the original atomization chamber, it allows for greater air intake thanks to the two airflow pins.

    44,93 € 49,92 €
    Reduced price!
    In Stock
  • BB Titanium Drip Tips v2 BC Bicolor made by Koncio Mods to fit the Billet Box™ Rev 4 devices ! CNC and Hand machined out of solid Titanium, colored by anodization.

    31,58 €
    In Stock
  • Out of stock

    The Diver is an RBA AIO atomizer and a Bridge compatible with the boro R4 format. Designed by Cthulhu Mod, it has a single coil deck placed at the top like an RDTA, a capacity of 4 ml and a filling on the front, it is oriented towards indirect inhalation.

    49,92 €
    Out of stock
  • Replacement glass window for R4 Boro and Proro for Billet Box, made by Xstar.

    5,75 €
    In Stock
  • Out of stock

    HoloSticker v1, Holographic (iridescent) stickers by Atmizoo. Pack of 5 stickers.

    2,08 €
    Out of stock
  • The Heir V2 RBA is a rebuildable bridge designed by GKI. Compatible with the Billet Box Boro R4 format, it is equipped with a single coil deck with clamps, multiple air settings using interchangeable pins and a 510 connection.

    75,78 € 108,25 €
    Reduced price!
    In Stock
  • Out of stock

    The Silo is a rebuildable atomizer designed by jG and Orca Vape. Compatible with the DotAIO format, it has a capacity of 4.4 ml and a single coil deck. Its air adjustment is made by interchangeable pins allowing an MTL to RDL vape.

    63,25 €
    Out of stock
  • Out of stock

    Drip Tip Ignition Booster Integrated for Billet Box™ and AiO box mods by Mission XV.

    37,42 €
    Out of stock
  • The Cartro is a 510 adapter designed by JG and allows you to screw a bridge on an AIO box in order to stabilize a resistance. The Cartro is also an adapter allowing the use of carto (pre-filled cartridge) in your AIO.

    9,48 € 31,58 €
    Reduced price!
    In Stock
  • Out of stock

    The ProRo in Polyetheretherketone (PEEK) is a tank designed by Protocol Vape Tech in Spain. The ProRo are compatible with most AiO Boxes that use Billet Box Boro Rev4 tanks. The air flow is located at the front, at the back and on the side.

    58,33 €
    Out of stock
  • The ProRo in Anodized Aluminum is a tank designed by Protocol Vape Tech in Spain. The ProRo are compatible with most AiO Boxes that use Billet Box Boro Rev4 tanks. The air flow is located at the front, at the back and on the side.

    33,75 € 37,50 €
    Reduced price!
    In Stock
  • Out of stock

    The 520 Tank is an AIO atomizer designed for AIO mods compatible with the boro R4 format. It consists of a rebuildable part, and two chimneys allowing the use of BVC or PnP coils. With a capacity of 4.2 ml, it has a front filling and a large airflow panel.

    38,25 €
    Out of stock
  • Out of stock

    The Nyx is a rebuildable bridge compatible with the Boro R4 format. Designed by the Australian modder Atmo Mods, it has a single coil deck positioned at the top of the boro. Powered by stainless steel cables, it has an adjustable airflow in the center for a DL - RDL vape.

    165,83 €
    Out of stock
  • The Chucky Revenge is a rebuildable bridge designed by Italian modder Voodooll. An evolved version of the Chucky, the Revenge is compatible with the Boro R4 format, it has a large single coil deck, 2 chamber reducers and two chimneys allowing an MTL, RDL or DL ​​vape.

    116,18 € 129,08 €
    Reduced price!
    In Stock
  • The Kronos Tip Integrated are drip tips in Billet Box format. Designed by Atmo Mods they are made of titanium.

    33,68 € 37,42 €
    Reduced price!
    In Stock
  • The Aphrodite Tip Integrated are drip tips in Billet Box format. Designed by Atmo Mods they are made of titanium and are MTL vape oriented

    33,68 € 37,42 €
    Reduced price!
    In Stock
  • The Chaos Tip Integrated are drip tips in Billet Box format. Designed by Atmo Mods they are made of titanium and have an insert to personalize them.

    33,68 € 37,42 €
    Reduced price!
    In Stock
  • Out of stock

    The Space Pod is an anodized aluminum tank, designed by Mission XV. Space Pods are compatible with AiO Boxes that use Billet Box's Boro Rev4 tanks. The air flow is located in front and on the side. Space Pods are lubricated before assembly, traces of VG may be present. It is strongly advised not to unscrew the rear screws. Top and bottom O-rings must be

    74,92 €
    Out of stock
  • Replacement tank for the Limelight AIO Tank in PCTG Clear.

    8,29 € 16,58 €
    Reduced price!
    In Stock
  • The Quantum Gold is a 510 / BB Drip Tip kit designed by Protocol Vape Tech in Spain. The Quantum are composed of a base in Billet Box format, a 510 mouthpiece and a beauty ring, all in SS.

    33,75 € 37,50 €
    Reduced price!
    In Stock
  • The Shifter is a hybrid Drip Tip designed by Protocol Vape Tech in Spain. The Shifters consist of a stainless steel base in Billet Box format, a tip and an insert.

    37,50 € 41,67 €
    Reduced price!
    In Stock
  • Out of stock

    The Limelight AIO Tank is a Boro R4 format PCTG tank designed by Limelight Mechanics. Compatible with the majority of AIO mods that use this format, it has a capacity of 5 ml (variable depending on the bridge in place) and an integrated air flow control.

    45,75 €
    Out of stock
  • The Venohm SLS is a mechanical AIO box designed by SnV Mods. Made of SLS and resin accessories, it allows the use of a Billet Box Vapor Boro R4 or a compatible AIO atomizer. Operating with a 21700 battery, it is equipped with a lockable switch on the front. Difficulties ordering the Venohm on our wesite ? You can't find a carrier ? Join the facebook group

    140,00 €
    In Stock
  • The Eliohm is a mechanical AIO mod designed by SnV Mods. Made of SLS and Resin, it is compatible with the Boro R4 format of Billet Box Vapor or a compatible AIO atomizer. Operating with an 18650 battery, it is equipped with a lockable switch on the front and a silver strip.

    112,42 €
    In Stock
  • Out of stock

    The B-01 v2 is a rebuildable AIO atomizer designed by modder SKNKWORX in the USA. Compatible with AIO mods using the boro R4 format, the B-01 is a top coil and it features multiple airflow settings ranging from MTL to RDL.

    165,83 €
    Out of stock
  • Replacement PCTG tank for the Boro Bridge Bishop Cubed by Ambition Mods

    1,48 € 4,92 €
    Reduced price!
    In Stock
  • Out of stock

    The Bishop Cubed is a rebuildable AIO atomizer designed for AIO mods compatible with the boro R4 format. Manufactured by Ambition Mods, the Bishop³ is composed of a 5 ml tank with front filling, a single coil deck and interchangeable airflow pins.

    39,92 €
    Out of stock
  • Out of stock

    The Flipper MOBB MINI Keychain Titanium is a rebuildable bridge atomizer designed for AIO mods using the Boro R4 format. Made by Monarchy in partnership with Friendly Flipper, the Mobb mini is machined in titanium and has a single coil deck and airflow adjustment by interchangeable pins.

    240,83 €
    Out of stock
  • Out of stock

    The BrijG V2 Gold is a bridge designed by the modder JG in partnership with Monarchy Vape for Billet Box and Box AIO using the Boro R4 format. Using Vaporesso GTX or Voopoo PNP coils, the BrijG V2 is exclusively compatible with the A-Tank, J-Tank or Hot Tank.

    91,58 €
    Out of stock
  • Out of stock

    The BrijG V2 SS is a bridge designed by the modder JG in partnership with Monarchy Vape for Billet Box and Box AIO using the Boro R4 format. Using Vaporesso GTX or Voopoo PNP coils, the BrijG V2 is exclusively compatible with the A-Tank, J-Tank or Hot Tank.

    83,25 €
    Out of stock
  • The Friendly 2.B Boro J-Tank Black in delrin is a tank designed by Friendly Flipper. They are only compatible with BrijG v1 to v2 from jG x Monarchy. The air flow is located in front and on the side.

    37,92 € 54,17 €
    Reduced price!
    In Stock
  • Out of stock

    The Friendly 3.P Boro Tank in Polyetheretherketone (PEEK) is a tank designed by Friendly Flipper. They are compatible with most AiO Boxes that use Billet Box's Boro Rev4 tanks. The air flow is located in front and on the side.

    70,75 €
    Out of stock
  • Out of stock

    The Friendly 3.P Boro Tank Midnight Dolphin Blue in Delrin is a tank designed by Friendly Flipper. They are compatible with most AiO Boxes that use Billet Box's Boro Rev4 tanks. The air flow is located in front and on the side.

    54,17 €
    Out of stock
  • Spare parts for Venohm by SnV Mods: Venohm Battery Cover and Switch

    25,00 €
    In Stock
  • The Vega RBA is a rebuildable bridge compatible with the boro R4 format designed by the Korean modder Xtra Mile Vape. Equipped with a single coil deck with opposed studs, it has an airflow adjustment ranging from MTL to DLR. New version with single chimney

    47,25 € 157,50 €
    Reduced price!
    In Stock
  • Out of stock

    The Wicket AIO DNA 60 is a regulated box designed by the Serbian modder Limelight. Operating with a Boro R4 or an AIO atomizer in Boro format, it is powered by an 18650 battery. Its electronics are based on the excellent DNA60 chip that can deliver a maximum of 60W.

    349,92 €
    Out of stock
  • Out of stock

    The Orbit by Mission XV is a rebuildable AIO atomizer designed for the Billet Box or Boro R4 compatible devices. Composed of a PCTG tank part with a capacity of 4.5 ml and a front filling, it has a single coil deck with opposite studs. Typed MTL-RDL, its airflow is adjustable by a screw system.

    150,00 €
    Out of stock
  • The Block Tip is a drip tip in Billet Box format designed by the Spanish modder Bestia Mods

    17,50 € 25,00 €
    Reduced price!
    In Stock
  • The wVallet B1 n°03/07 for Billet Box is a hybrid between a panel and a case, made of leather and handmade in France, by J-P Flutner of Kuut Atelier du Cuir.

    47,92 € 95,83 €
    Reduced price!
    In Stock
  • The wVallet B1 n°06/07 for Billet Box is a hybrid between a panel and a case, made of leather and handmade in France, by J-P Flutner of Kuut Atelier du Cuir.

    60,42 € 120,83 €
    Reduced price!
    In Stock
  • The wVallet B1 n°01/07 for Billet Box is a hybrid between a panel and a case, made of leather and handmade in France, by J-P Flutner of Kuut Atelier du Cuir.

    62,08 € 124,17 €
    Reduced price!
    In Stock
  • The ProRo in Polycarbonate (PC) is a tank designed by Protocol Vape Tech in Spain. The ProRo are compatible with most AiO Boxes that use Billet Box Boro Rev4 tanks. The air flow is located at the front, at the back and on the side.

    26,25 € 29,17 €
    Reduced price!
    In Stock
  • The Quantum in PMMA is a 510 / BB Drip Tip kit designed by Protocol Vape Tech in Spain. The Quantum are composed of a stainless steel base in Billet Box format, a 510 mouthpiece and a beauty ring, both in PMMA.

    26,25 € 29,17 €
    Reduced price!
    In Stock
  • Sleek Watts +/- button for Billet Box made by Mechanical Parts

    4,92 €
    In Stock
  • Watts +/- button for Billet Box made by Mechanical Parts

    4,92 €
    In Stock
  • Set of curved panels and switch Navigator model for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of T6 aluminum, CNC machined and engraved.

    108,33 €
    In Stock
  • Out of stock

    The DotAIO V2 is an all-in-one regulated box mod designed by Dotmod. Powered by an 18650 battery, the DotAIO V2 has a removable 2 ml reservoir, a TFT screen on the edge and a maximum adjustable power of 75W.

    91,58 €
    Out of stock
  • Out of stock

    The Pioneer DotRBA is an RBA AIO atomizer designed for the DotAIO, SE and DotAIO V2 from Dotmod. Made by BP Mods, it can contain 3.5 ml of liquid with filling on the front and it has a single coil deck. Its MTL-RDL-type air flow is adjustable by interchangeable pins.

    37,42 €
    Out of stock
  • The Pioneer Insider is an RBA AiO atomizer and a Bridge designed for AiO Box Mods accepting the Billet Box R4 Boro format. Designed by BP Mods, it has a 4ml tank and a single coil deck. It is filled on the front and it is MTL - RDL vape oriented.

    49,92 €
    In Stock
  • Replacement switch or button Engraved Pattern for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of engraved aluminium.

    20,75 €
    In Stock
  • Out of stock

    The VapeSnail is a rebuildable atomizer designed by Atmizoo for the Billet Box Rev.4. Equipped with a simple coil deck, it consists of a 5 ml tank part and a base with an air flow adjustment as well as an anti-condensation system.

    114,58 €
    Out of stock
  • Out of stock

    The ProRo in Delrin is a tank designed by Protocol Vape Tech in Spain. The ProRo are compatible with most AiO Boxes that use Billet Box Boro Rev4 tanks. The air flow is located at the front, at the back and on the side.

    22,50 € 25,00 €
    Reduced price!
    Out of stock
  • The Quantum in PET is a 510 / BB Drip Tip kit designed by Protocol Vape Tech in Spain. The Quantum are composed of a stainless steel base in Billet Box format, a 510 mouthpiece and a beauty ring, both in PET.

    26,25 € 29,17 €
    Reduced price!
    In Stock
  • The Rounded in PMMA is a 510 / BB Drip Tip kit designed by Protocol Vape Tech in Spain. The Rounded are composed of a stainless steel base in Billet Box format, a 510 mouthpiece and a beauty ring, both in PMMA.

    23,33 € 29,17 €
    Reduced price!
    In Stock
  • Replacement switch or button for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of brushed stainless steel.

    12,42 €
    In Stock
  • Replacement switch or button Engraved Symbol for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of engraved stainless steel.

    16,58 €
    In Stock
  • Out of stock

    Set of screws for Billet Box Rev4. These screws are used to replace the original screws of your Billet Box.

    8,25 €
    Out of stock
  • Set of screws for Billet Box Rev4 in colors by Cerakote treatment. These screws allow you to customize your Billet Box by replacing the original screws.

    4,54 € 9,08 €
    Reduced price!
    In Stock
  • Set of curved panels and switch Tubalcaïn model for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of T6 aluminum, CNC machined and engraved.

    108,33 €
    In Stock
  • Set of curved panels Calista and switch model for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of T6 aluminum, CNC machined and engraved.

    108,33 €
    In Stock
  • Set of curved panels and switch Kim model for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of T6 aluminum, CNC machined and engraved.

    108,33 €
    In Stock
  • Remplacement reservoir for the VapeSnail from Atmizoo. Includes foodgrade custom silicon refill cover.

    3,38 € 11,25 €
    Reduced price!
    In Stock
  • Out of stock

    Set of curved panels and switch Kashmira model for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of T6 aluminum, CNC machined and engraved in a limited edition of 20 pieces.

    108,33 €
    Out of stock
  • Set of curved panels and switch Thaïs model for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of T6 aluminum, CNC machined and engraved in a limited edition of 15 pieces.

    108,33 €
    In Stock
  • Set of 10 Absorbent Pads of semi-synthetic fabric for Velvet Vape Boropad and Boropad MTL.

    1,25 € 4,17 €
    Reduced price!
    In Stock
  • Out of stock

    The Boropad by Velvet Vape is an accessory for Boro Rev4 from Billet Box Vapor. It is an anti-condensation system with absorbent pads, all equipped with an airflow adjustment.

    14,92 €
    Out of stock
  • Set of curved panels Haimeï model for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of T6 aluminum, CNC machined and engraved in a limited edition of 10 pieces.

  • Set of curved panels Hypatie model for Billet Box Rev4. From the collaboration between SnV Mods and Volute Modz, they are made of T6 aluminum, CNC machined and engraved in a limited edition of 5 pieces.

  • Out of stock

    The DotShell is a rebuildable atomizer designed by Atmizoo specifically for the DotAIO of DotMod. It allows single coil assemblies and has an air flow adjustment at its base, its capacity is 3 ml.

    56,25 €
    Out of stock
  • The DotMission is a rebuildable atomizer for Dot AIO and Dot AIO SE designed by the Mission XV modder. Allowing single coil builds, it can contain approximately 3.5 ml of liquid and has an air flow adjustment by interchangeable module.

  • Multi-color Silicone Gaskets, set of 7 colored Xstar seals made of silicone for Boro Tank Rev4.

    16,58 €
    In Stock
  • Clear & Black Silicone Gaskets, set of 2 Xstar seals: black and transparent made of silicone for Boro Tank Rev4.

    5,75 €
    In Stock
  • Out of stock

    BB Brass 3D Button, switch made by Koncio Mods to fit the Billet Box™ Rev 4 devices ! CNC and hand machined out of Brass, deep engraving.

    17,93 € 19,92 €
    Reduced price!
    Product available with different options
  • Out of stock

    The Nautilink of the brand Velvet Vape is a bridge for Billet Box manufactured by the Greek moder Atmizoo, it is compatible with the Billet Box Rev4 Boro Tank. The Nautilink bridge allowing the use of BVC Nautilus - Aspire heads.

    15,75 €
    Out of stock
  • Replacement glass window design by SnV Mods for R4 Boro for Billet Box Rev4, made by Drip'n Vape.

    4,38 € 8,75 €
    Reduced price!
    In Stock
  • DotAIO Titanium Button for DotAIO by Koncio Mods. CNC machined, hand finished. Made of titanium and colored by anodization.

    10,00 € 12,50 €
    Reduced price!
    In Stock
  • DotAIO Button for DotAIO by Koncio Mods. CNC machined, hand finished. Made in POM or Ultem.

    8,00 € 10,00 €
    Reduced price!
    In Stock
  • The 510 Base for VapeSnail from Atmizoo is a spare part allowing the deck to be connected to a box in order to stabilize the resistance

    14,54 € 29,08 €
    Reduced price!
    In Stock
  • Out of stock

    Set of 10 Absorbent Pads of semi-synthetic fabric for Atmizoo VapeSnail.

    1,25 € 4,17 €
    Reduced price!
    Out of stock
  • Out of stock

    Multipins are airflow pins by Atmizoo for Velvet Vape for BVC Nautilus 2 and DotAIO coils from Aspire.

    8,25 €
    Out of stock
  • Panels Acrylic Engraved set boro front door, switch door for Billet Box Rev4, produced by Koncio Mods.

    39,33 € 49,17 €
    Reduced price!
    In Stock
  • Panels Wave set boro front door, switch door and switch in painted acrylic for Billet Box Rev4, produced by Koncio Mods.

    58,60 € 73,25 €
    Reduced price!
    In Stock
  • Panels Cerebral set boro front door, switch door and switch in painted acrylic for Billet Box Rev4, produced by Koncio Mods.

    58,60 € 73,25 €
    Reduced price!
    In Stock
  • Panels Trooper set boro front door, switch door and switch in painted acrylic for Billet Box Rev4, produced by Koncio Mods.

    58,60 € 73,25 €
    Reduced price!
    In Stock
  • Out of stock

    Panels Rick set boro front door, switch door and switch in painted acrylic for Billet Box Rev4, produced by Koncio Mods.

    73,25 €
    Out of stock
  • Out of stock

    Panels Dead P set boro front door, switch door and switch in painted acrylic for Billet Box Rev4, produced by Koncio Mods.

    73,25 €
    Out of stock
  • Out of stock

    Cerakoted aluminum inners set for Billet Box Rev4B by Koncio Mods.

    63,25 €
    Out of stock
  • Replacement glass window Skulls category for R4 Boro for Billet Box Rev4, made by Drip'n Vape.

    8,75 €
    In Stock
  • Replacement glass window symbol category for R4 Boro for Billet Box Rev4, made by Drip'n Vape.

    8,75 €
    In Stock
  • Set of colored titanium screws for Billet Box Rev 4. These screws allow you to customize your Billet Box by replacing the original screws.

    9,92 €
    In Stock
  • Bridge for Nord Smok coils for Billet Box made of Titanium by Koncio Mods in Poland.

  • Out of stock

    BB Titanium Drip Tips v2 made by Koncio Mods to fit the Billet Box™ Rev 4 devices ! CNC and Hand machined out of solid Titanium, colored by anodization.

    24,92 €
    Out of stock
  • Titanium Button v2 BC Bicolor, switch made by Koncio Mods to fit the Billet Box™ Rev 4 devices ! CNC and hand machined out of solid Titanium, colored by anodization.

    20,83 €
    In Stock
  • Titanium Button v2, switch made by Koncio Mods to fit the Billet Box™ Rev 4 devices ! CNC and hand machined out of solid Titanium, colored by anodization.

    14,17 €
    In Stock
  • Out of stock

    The Unilink of the brand Velvet Vape is a bridge for Billet Box manufactured by the Greek moder Atmizoo, it is compatible with the Billet Box Rev4 Boro Tank. The Unilink bridge allowing the use of EUC - Vaporesso heads.

    27,08 €
    Out of stock
  • Out of stock

    VapeShell is a rebuildable atomizer bridge manufactured by Atmizoo in Greece, it's compatible with Billet Box Boro Tank rev4. It allows single coil and features an airflow control ring.

    52,92 €
    Out of stock
  • Cosmetic 510 Adapator for Billet Box ™ by K & R Vapor, manufactured by Signature Tips in England. Designed to fit the Rev4 Billet Box, it can be flush with the standard 510 drip tips.

  • The SnV Mods Anti-condensation Plug for Billet Box, Boro Rev4B compatible is a small accessory that prevents the spread of steam on the doors of your BB.

    1,63 € 3,25 €
    Reduced price!
    In Stock
  • Out of stock

    Set of 3 AFC Anti-condensation by SnV Mods for Billet Box, compatible Boro Rev4B these are accessories that prevent the spread of steam on the doors of your BB. They also offer you different air intakes.

    11,58 €
    Out of stock
  • Set of 3 AFC MTL Anti-condensation by SnV Mods for Billet Box, compatible Boro Rev4B these are accessories that prevent the spread of steam on the doors of your BB. They also offer you different air intakes.

    8,25 €
    In Stock
  • The North Bridge of the brand K&R Vapour is a bridge for Billet Box manufactured by the English moder Signature Tips, it is compatible with the Billet Box Rev4 Boro Tank. The North Bridge bridge allowing the use of Nord Smok heads.

  • The SVT Arrow is a bridge for Billet Box made by Swiss Vape Technology in Switzerland, it is compatible with the Boro Tank rev4 Billet Box. Arrow bridge allowing the use of BVC Nautilus - Aspire heads.

  • The Billet Box RNB Rev.4B 2020 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. Everything is customizable from a use and aesthetic point of view.

  • The Billet Box Unicorn Poo Rev.4B 2020 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. Everything is customizable from a use and aesthetic point of view.

  • The Billet Box RPG Rev.4B 2020 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. Everything is customizable from a use and aesthetic point of view.

  • The Billet Box Dober Rev.4B 2020 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. Everything is customizable from a use and aesthetic point of view.

  • BB Titanium Drip Tips made by Koncio Mods to fit the Billet Box™ Rev 4 devices ! CNC and Hand machined out of solid Titanium, colored by anodization.

    24,92 €
    In Stock
  • Out of stock

    BBR4 Pico- plus tip REV4 - Drip Tips made to fit the Billet Box Rev 4 devices ! CNC machined out of T304 stainless steel and naval brass.

    23,50 €
    Out of stock
  • Out of stock

    BB REV4 BUTTON, these are replacement sunk buttons for the Billet Box Rev4 only! Sunk Version.

    14,75 €
    Out of stock
  • Hybrid Drip Tips made by Koncio Mods to fit the Billet Box™ Rev 4 devices ! CNC and Hand machined out of Titanium et Delrin, Ultem or Acrylic

    24,92 €
    In Stock
  • Hybrid Button, switch made by Koncio Mods to fit the Billet Box™ Rev 4 devices ! CNC and hand machined out of delrin, ultem or acrylic

    10,00 € 12,50 €
    Reduced price!
    In Stock
  • Out of stock

    BBR4 Pico- minus tip REV4 - Drip Tips made to fit the Billet Box Rev 4 devices ! CNC machined out of T304 stainless steel and naval brass.

    23,50 €
    Out of stock
  • Bridge for EUC Vaporesso coils for Billet Box made of Titanium by Koncio Mods in Poland.

  • The Exocet V2 is a rebuildable atomizer. This bridge is made in the UK by Modder Attysmith commonly known as Hellfire Mods. Compatible with the Boro R4 and similar formats (Evo 60), it has a single coil deck and a central airflow adjustable by Air Tube.

  • Out of stock

    BBR4 Busto- minus tip REV4 - Drip Tips made to fit the Billet Box Rev 4 devices ! CNC machined out of T304 stainless steel and naval brass.

    23,50 €
    Out of stock
  • BB REV4 BUTTON, these are replacement buttons for the Billet Box Rev4 only! Flat Version.

    11,80 € 14,75 €
    Reduced price!
    In Stock
  • BBR4 Bub- minus REV4 - Drip Tips made to fit the Billet Box Rev 4 devices ! CNC machined out of T304 stainless steel and naval brass.

    16,45 € 23,50 €
    Reduced price!
    In Stock
  • The MTL VapeShell & DotShell Kit includes 3 air flow reducers designed to provide a mouth to lungh vape.

    3,71 € 7,42 €
    Reduced price!
    In Stock
  • The Billet Box 2019 Rev.4B is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. Everything is customizable from a use and aesthetic point of view.

  • The Billet Box Rat Black Rev.4B 2019 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. Everything is customizable from a use and aesthetic point of view.

  • The Billet Box Fawkes Rev.4B 2019 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. Everything is customizable from a use and aesthetic point of view.

  • The Billet Box Kürbis Rev.4B 2019 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. Everything is customizable from a use and aesthetic point of view.

  • The Billet Box Unicorn Poo SS-B Rev.4B 2019 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. Everything is customizable from a use and aesthetic point of view. The version SS-B has a SS switch

  • The Billet Box BlueBald Rev.4B 2019 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. The version BlueBald light bleu (BX9)  has a Mother of pearl switch (MOP)

  • The Billet Box Nugget Rev.4B 2020 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity. Everything is customizable from a use and aesthetic point of view.

  • The Billet Box Bx9 Rev.4B 2019 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity.

  • The Billet Box Bx7 SS-B Rev.4B 2019 is an all-in-one varaible power box by Billet Box Vapor, working with a 18650 battery (not included), it is equipped with a DNA60 Big Screen by eVolv, the Billet Box has Boro Faced tank of 5,5ml of capacity.

  • The R4 Boro Black is a black version of the Boro tank for the Billet Box REV.4, Borohm. The tank has a sliding borosilicate glass face for simple and efficient filling.

    33,25 €
    In Stock
  • Out of stock

    The Care Kit is a Billet Box maintenance set consisting of a set of O-rings, a replacement Boro Gesket and a refill bottle.

    7,42 €
    Out of stock
  • Out of stock

    The R4 Boro White is a whiteversion of the Boro tank for the Billet Box REV.4, Borohm. The tank has a sliding borosilicate glass face for simple and efficient filling.

    33,25 €
    Out of stock
Showing 1 - 171 of 171 items